HR10A-7P-6S to DB9/RS232 9-pin male cable

The HR10A-7P-6S to DB9/RS232 9-pin male cable is compatible with Basler ace and Basler MED ace cameras. It can connect the industrial camera to the power supply, trigger, or Basler SLP Controller. The cable has a Hirose HR10A-7P-6S female 6-pin connector on one side. The other side is a DB9/RS232 9-pin male connector.   We can also install the cable on a drag chain. The bending radius should be no less than 10 times the cable OD. For more install tips, please refer to your drag chain install guide. You can also refer to youtube for the drag chain install guide.  

Compatibility Cameras List

1. Basler Ace series GIGE AVT CCD camera.
2. Sony CCD DXC XC-75 Camera.

HR10A-7P-6S to DB9/RS232 Cable Customization

• The connector type includes female and male connectors. Please advise us of the connector model number for more details.
• The angle orientation. We offer 8 orientations for options, please refer to the picture below.
• The cable length. That is to say, from 0.2 meters to 15 meters.
• The cable color, such as black, beige, etc.
• The pin assignment between HR10A-7P-6S and DB9 connector.
• The cable-type, twisted or non-twisted. We also accept customization on wire AWG, for example, 20AWG for power supply.